Copy the Installation Tools from the CD-ROM
5604-RIO-PDPMV1
♦
ProLinx Standalone
Rockwell Automation® Remote I/O to PROFIBUS DP-V1 Master Gateway
ProSoft Technology, Inc.
Page 9 of 45
November 20, 2008
2
Copy the Installation Tools from the CD-ROM
In This Chapter
Install ProSoft Configuration Builder (PCB) ............................................. 9
Copy the Sample Application Files ........................................................ 10
There is one setup guide, one application (ProSoft Configuration Builder), one
sample configuration file (PPF) and one sample ladder logic file (RSP) that you
must download from the ProLinx Solutions CD to your PC whether you are using
the sample configuration or you are modifying the configuration to suit the needs
of your application. This section describes how to get everything you need
loaded to your PC.
You must perform these steps regardless of whether you
are configuring your modules now or just reading about the sample
applications.
2.1
Install ProSoft Configuration Builder (PCB)
ProSoft Configuration Builder helps you configure the module for your
application.
1
Insert the ProLinx Solutions CD into the CD-ROM drive on your PC. The
ProLinx Solutions splash page appears:
