Configure the PROFIBUS Master
5604-RIO-PDPMV1
♦
ProLinx Standalone
Rockwell Automation® Remote I/O to PROFIBUS DP-V1 Master Gateway
ProSoft Technology, Inc.
Page 17 of 45
November 20, 2008
4
Configure the PROFIBUS Master
In This Chapter
Complete the ProSoft Configuration Builder Sections ........................... 18
Based on the sample application, a remote PROFIBUS DP Slave is connected to
a 5604-RIO-PDPMV1, which communicates data to the PLC5 processor via
Remote I/O. The goal here is to begin to establish communications between the
PROFIBUS DP Slaves and the PLC5 processor. The default configuration is
designed to pass 768 words between the PROFIBUS DP network and the PLC5
processor.
Configuration is accomplished using ProSoft Configuration Builder (PCB). The
sample configuration file is
5604-RIO-PDPMV1.PPF
.
1
Start PCB.
2
Select
File
/
Open
.
3
Navigate to the location where you copied the
5604-RIO-PDPMV1.PPF
file
and select this file.
4
Expand the
5604-RIO-PDPMV1
module selection.
