5604-RIO-PDPMV1
♦
ProLinx Standalone
Configure the PROFIBUS Master
Rockwell Automation® Remote I/O to PROFIBUS DP-V1 Master Gateway
Page 20 of 45
ProSoft Technology, Inc.
November 20, 2008
4.1.2 Profibus Master DPV1
The next step is to configure the PLX PDPM-V1 section.
1
Double-click the
icon. This action opens the Edit dialog box.
2
Notice that the Input and Output data size parameters are configured for 768
words of PROFIBUS data, each in their own area of memory in the module
database. Cyclic data commutation of slave I/O data is handled automatically
by the master. You do not need to do anything other than specify the start
register and data size for slave I/O data. This has been done for you in the
sample configuration and the sample ladder logic. The Mailbox, Slave, Alarm,
Status and Watchdog registers are all disabled as they are not used in the
sample configuration.
3
Refer to the PDPMV1 Driver Manual, located on the ProLinx Solutions CD,
for information on how to configure these settings for your own application.
After making changes, be sure to save your changes before moving on to the
next step.
