PRONAR T663/1, Руководство оператора

Страница: 78 / 135

Pronar T663/1 T663/1 SILO SECTION 4
4.12
4.4.1 GENERAL INFORMATION ABOUT LOADING
Before beginning loading make certain that the load box side walls and slide gate are
properly closed and secured. The trailer must be positioned to travel forwards and hitched to
the tractor. Loading should only take place, when trailer is placed on flat level surface and
hitched to tractor. If load does not exert pressure on the side walls or extension walls, the
linking cable can be disengaged. In other cases it must be installed in cable release
mechanism installed in the side walls and extensions. Load box walls may get damaged if
there is no linking cable.
Regardless of the type of load carried, the user is obliged to secure it in such a manner that
the load is unable to spread and cause contamination of the road. If this is impossible, do
NOT transport this type of load.
Materials, which in contact with painted or steel surfaces may cause damage, should be
transported in sealed packaging (bags, boxes, barrels, etc.). After unloading, the load box
should be thoroughly cleaned with a strong jet of water.
If the transported materials exert high local pressure on the load box platform it should be
protected against damage using thick planks, plywood or other materials of similar properties.
ATTENTION
Always try to distribute the load uniformly in the load box.
Do NOT exceed the trailer's maximum carrying capacity.
Due to various densities of materials, the use of the total load box capacity may lead to
exceeding permissible carrying capacity of the trailer. Guideline specific weight of selected
materials is shown in table (4.1). Take care not to overload the machine. Loading should be
carried out by a person experienced in this type of work and having appropriate authorisation
for operating equipment (if required).