PRONAR T663/1, Руководство оператора

Страница: 83 / 135

SECTION 4 Pronar T663/1 T663/1 SILO
4.17
Oilseed rape or seeds of other plants of very small size or powder materials can be
transported provided the load box is properly sealed in places where gaps are bigger than
the seed diameter or other carried material. Profiled rubber seals, silicone sealers, plastic
wrap, rope or textile materials are recommended materials to provide sealing of the load box.
Some bulk loads (e.g. building materials, such as gravel or slag) may cause more rapid
damage to paintwork.
Loads of pieces or solid lumps
Loads of pieces or solid lumps are generally hard materials of significantly greater
dimensions than bulk loads (stones, coal, bricks and ballast). These materials without prior
preparation of the load box may cause indentation of the floor or walls and abrasion of
paintwork. In order to protect it, lay thick plywood, hard particle board, thick planks or other
materials of similar properties on the load box platform and possibly on walls and wall
extensions. Non-compliance with the instructions provided could invalidate the warranty.
Loading of material in pieces or solid lumps must be from a low height. The load must not fall
with great force on the floor of the load box, even if it is protected.
Hazardous loads
According to the European ADR agreement concerning the international road transport of
hazardous materials, the transport of this type of load (defined in detailed by this agreement)
is prohibited with the use of agricultural trailers. The only exception are plant protection
materials and artificial fertilisers, which may be transported on agricultural trailers on the
condition that they are transported in the appropriate packaging and in quantities envisaged
by the ADR agreement.
DANGER
If it is necessary to carry permitted hazardous materials, acquaint yourself with the
regulations concerning transport of hazardous materials in force in the given country and
also the regulations of the ADR agreement.
Carefully read the information leaflets provided by the load manufacturer and observe the
instructions for transporting and handling the load. Ensure whether during loading work it
is necessary to apply additional personal protection (masks, rubber gloves etc.)