PRONAR T663/1, Руководство оператора, Страница: 14 / 135

Pronar T663/1 T663/1 SILO SECTION 1
1.4
1.1.3 LIST OF SERIAL NUMBERS
VIN
S Z B 6 6 3 1 0 0 X
FRONT AXLE FACTORY NUMBER
REAR AXLE FACTORY NUMBER
TIP
In the event of ordering a replacement part or in the case of the appearance of problems
it is often essential to give the factory numbers of parts or the VIN number of the trailer,
therefore it is recommended that these numbers are inscribed in the spaces below.
1.2 PROPER USE
The trailer is designed for transport of harvested crops and agricultural products (loose and
bulky materials) at the farm and on public roads. It is acceptable to transport construction
materials, mineral fertilisers and other loads, if fulfilling conditions indicated in section 4. Non-
compliance with the recommendations concerning the carriage and loading of goods
described by the Manufacturer and the road transport regulations in force in the country in
which the trailer is used shall void the warranty and is regarded as the use of the machine
contrary to its intended purpose.
The trailer is not intended or designed for transporting people, animals or goods classified as
dangerous materials.
The trailer is designed according to current safety requirements and engineering standards.
The brake system and the light and indicator system meet the requirements of road traffic
regulations. The maximum speed of the trailer on public roads in Poland is 30 km/h (pursuant
to Road Traffic Act of June 20th 1997, article 20). In the countries where the trailer is used,
the limits stipulated by the road traffic legislation in force in a given country must be
observed. The trailer speed must not, however, be greater than the maximum design speed
of 30 km/h.