PRONAR T663/1 Скачать руководство пользователя

Страница: 74 / 135

Pronar T663/1 T663/1 SILO

SECTION 4

4.8

Unhitching the trailer

In order to unhitch the trailer from the tractor follow these steps.

Immobilise tractor and trailer with parking brake.

Controlling the valve, set the drawbar eye at such a height that one may safely

unlock and unhitch the trailer.

Lower the support.

Turn off tractor engine. Ensure that unauthorised persons do not have access

to the tractor cab.

Disconnect all hydraulic tipping system conduits from tractor.

Disconnect electric lead.

DANGER

Exercise caution when unhitching the trailer from the tractor. Ensure good visibility.
Unless it is necessary, do not go between tractor and trailer.

Before disconnecting conduits and drawbar eye, close tractor cab and secure it against
access by unauthorised persons. Turn off tractor engine.

Disconnect pneumatic system conduits (applies to double conduit pneumatic

system).

Disconnect pneumatic conduit marked red.

Disconnect pneumatic conduit marked yellow.

Disconnect pneumatic system conduits (applies to single conduit systems):

Disconnect pneumatic conduit marked black.

Disconnect hydraulic braking system conduits (applies to trailer version with

hydraulic braking system).

Disconnect the conduit of the support hydraulic system.

Protect conduit ends with covers. Place conduit plugs in appropriate sockets.

Place chocks under trailer wheel.

Wheel chocks must be so placed that one is in front of the wheel and

the second is behind the wheel - see section 2.

Содержание T663/1








































































































































Результаты поиска

Содержание T663/1

Отзывы:

Похожие инструкции для T663/1

Бренды по названию

Популярные бренды

PRONAR T663/1, Руководство оператора

Результаты поиска

Содержание T663/1

Отзывы:

Похожие инструкции для T663/1

Бренды по названию

Популярные бренды