BRP can-am RENEGADE 1000 2015 Скачать руководство пользователя страница 1

Страница: 1 / 156

2015

Operator’s

Guide

Includes

Safety, Vehicle

and

Maintenance Information

(Canada/United States)

RENEGADE

500/800R/1000

219 001 453

OPERATOR’S GUIDE, RENEGADE 500/800R/1000/ ENGLISH
GUIDE DU CONDUCTEUR ENEGADE 500/800R/1000 / ANGLAIS

FAIT AU / MADE IN CANADA

U/M:P.C.

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

2 1 9 0 0 1 4 5 3

WARNING

YOUR VEHICLE CAN BE HAZARDOUS TO OPERATE. A collision or rollover

can occur quickly, if you fail to take proper precautions, even during routine

maneuvers such as turning and driving on hills or over obstacles.

For your safety, understand and follow all the warnings contained in this

Operator's Guide and on the labels on your vehicle. Failure to follow these

warnings can result in SEVERE INJURY OR DEATH!

Keep this Operator's Guide with the vehicle at all times.

WARNING

Disregarding any of the safety precautions and instructions contained in

this Operator’s Guide,

SAFETY DVD

video and on-product safety labels

could result in an injury including the possibility of death!

WARNING

This vehicle may exceed the performance of other vehicles you may have

ridden in the past. Take time to familiarize yourself with your new vehicle.

CALIFORNIA PROPOSITION 65 WARNING

WARNING

This product contains or emits chemicals known to the state of California to

cause cancer and birth defects or other reproductive harm.

The following trademarks are the property of Bombardier Recreational

Products Inc.:

In Canada, products are distributed by Bombardier Recreational Products Inc.

(BRP). In USA, products are distributed by BRP US Inc.

Can-Am™

D.E.S.S.™

Renegade™

Rotax

TTI™

XPS™

DPS™

X™

†

Visco-Lok is a trademark of GKN Viscodrive GmbH.

vmo2015-010 en
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
©2014 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

ATV

VEHICLE

ENGINE

Owner:

Purchase Date

Warranty Expiry Date

Please verify with your dealer to ensure your vehicle has been registered with BRP.

While reading this Operator’s Guide, remember that:

WARNING

Indicates a potential hazard that, if not avoided, could result in serious

injury or death.

THIS VEHICLE CAN BE HAZARDOUS TO OPERATE.

A collision or rollover can occur quickly, even during

routine maneuvers such as turning and driving on hills

or over obstacles, if you fail to take proper precautions.

SEVERE INJURY OR DEATH

can result if

you do not follow these instructions:

•

BEFORE YOU OPERATE THIS VEHICLE, READ

THIS OPERATOR’S GUIDE AND ALL

ON-PRODUCT SAFETY LABELS.

• NEVER OPERATE THIS VEHICLE WITHOUT

PROPER INSTRUCTIONS.

Complete a certified

training course.

•

NEVER CARRY A PASSENGER.

You increase

your risk of losing control if you carry a passenger.

• NEVER OPERATE THIS VEHICLE ON A PAVED

SURFACE.

You increase your risk of losing control

if you operate this vehicle on pavement.

• NEVER OPERATE THIS VEHICLE ON PUBLIC

ROADS.

You can collide with another vehicle if you

operate this vehicle on a public road.

• ALWAYS WEAR AN APPROVED HELMET,

eye protection, and protective clothing.

• NEVER USE WITH DRUGS OR ALCOHOL.

They slow reaction time and impair judgment.

• NEVER OPERATE THIS VEHICLE AT EXCESSIVE

SPEEDS.

You increase your risk of losing control

if you operate this vehicle at speeds too fast for the

terrain, visibility conditions, or your experience.

•

NEVER ATTEMPT WHEELIES, JUMPS, OR OTHER

STUNTS.

WARNING

Read this guide thoroughly. It contains important safety information. Minimum recommended operator’s age:

16 years old. Experienced operator only. Keep this Operator’s Guide in the vehicle.

WARNING

Original Instructions

Содержание can-am RENEGADE 1000 2015





























































































































































Результаты поиска

Содержание can-am RENEGADE 1000 2015

Отзывы:

Похожие инструкции для can-am RENEGADE 1000 2015

Бренды по названию

Популярные бренды

BRP can-am RENEGADE 1000 2015, Руководство оператора

Результаты поиска

Содержание can-am RENEGADE 1000 2015

Отзывы:

Похожие инструкции для can-am RENEGADE 1000 2015

Бренды по названию

Популярные бренды