BRP can-am RENEGADE 1000 2015 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 156

BRP can-am RENEGADE 1000 2015 Скачать руководство пользователя страница 36

OPERATION WARNINGS

WARNING

POTENTIAL HAZARD

Operating this vehicle with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of this vehicle may
cause changes in handling which in some situations could lead to an acci-
dent.

HOW TO AVOID THE HAZARD

Never modify this vehicle through improper installation or use of acces-
sories. All parts and accessories added to this vehicle should be approved
by BRP and should be installed and used according to instructions. If you
have questions, consult an authorized Can-Am dealer.

NEVER install a passenger seat or use the racks to carry a passenger.

Modification of the vehicle to increase speed and performance may violate
the terms and conditions of your vehicle limited warranty. In addition, cer-
tain modifications including the removal of engine or exhaust components
are illegal under most laws.

34

_______

SAFETY INFORMATION

________

«
...
34
35
36
37
38
...
»

Содержание can-am RENEGADE 1000 2015





























































































































































Отзывы:

Нет отзывов