Pronar PDT260; PDT260C, PDT300; PDT 300C, PDT340
SECTION 2
2.6
durable supports must also be used. Do NOT carry out work under a machine,
which has only been raised with the three point linkage.
•
The machine must not be supported using fragile elements (bricks or concrete
blocks).
•
The paint coating should be cleaned off before beginning welding work. Burning
paint fumes are poisonous for people and animals. Welding work should be
carried out in a well lit and well ventilated space.
•
During welding work pay attention to flammable or fusible elements. If there is a
risk that they will catch fire or be damaged, they should be removed or covered
with non-flammable material before commencing welding work. The machine
must be disconnected from the tractor before commencing electric welding.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
After finishing servicing or repair work remove all tools from the machine.
•
Damaged, missing or worn cutting blades must be replaced in pairs in order to
maintain the balance of the cutting disc.
•
After completing work associated with lubrication, remove excess oil or grease.
The mower should be kept clean and tidy.
•
Do NOT install additional fittings not according to the specifications defined by the
Manufacturer.
•
In order to reduce the danger of fire the machine must be kept in a clean
condition.
•
In order to limit occupational risks associated with exposure to noise during
mower operation use individual protection (ear protectors).
2.2
DRIVING ON PUBLIC ROADS
•
When driving on public roads, comply with the road traffic regulations.
Содержание PRONAR PDT260
