PRONAR PRONAR PDT260, Руководство оператора

Страница: 24 / 97

Pronar PDT260; PDT260C, PDT300; PDT 300C, PDT340 SECTION 2
2.4
•
Before using the machine the user should thoroughly acquaint himself with the
PTO shaft Operator's Manual and adhere to the recommendations contained in it.
•
Disconnect the drive shaft each time when it is not necessary to drive the
machine.
•
Do NOT go over and under the shaft or stand on it equally during work as also
when the machine is parked.
•
Do NOT wear loose clothing, straps or whatever that may become wrapped round
the rotating drive shaft. Contact with rotating PTO shaft may cause severe
injuries.
•
The mower may not be used or transported in conditions of limited visibility.
•
When transporting the mower mounted on the tractor, close all hydraulic cylinders
valves.
•
Before lowering or lifting the mower mounted on the three-point linkage, make
sure there are no bystanders, especially children, near the machine.
•
Before starting the mower make sure that there are no bystanders (especially
children) or animals in the danger zone (an area with a radius of up to 50 m from
the mower). The machine operator is obliged to ensure proper visibility of the
machine and the working area.
•
Before starting the mower's PTO shaft, the cutting unit must be in working
position.
•
Mowing should begin after reaching nominal PTO RPM of 540 rpm. Do NOT
overload shaft and mower and also engage the clutch suddenly.
•
During cutting do NOT use PTO revolution speed greater than 540 rpm.
•
When mowing on the edges of streets, public roads, on stony ground there is a
risk that thrown out stones and foreign bodies may pose a risk to bystanders and
other vehicle passing by.
•
Do NOT leave the tractor cab, when the machine drive is engaged.
•
Do NOT stand within the machine's working zone.