PRONAR PRONAR PDT260, Руководство оператора

Страница: 25 / 97

SECTION 2 Pronar PDT260; PDT260C, PDT300; PDT 300C, PDT340
2.5
•
Do NOT approach cutting unit guards until the rotating cutting parts come to a
complete standstill.
•
Do NOT operate mower while reversing. While reversing lift machine.
•
The mower's hydraulic system is under high pressure when operating.
•
Before disconnecting the shaft, turn off the tractor engine and remove the key
from the ignition.
•
Reduce pressure prior to disconnecting the hydraulic system.
•
Before disconnecting mower from the tractor's linkage, lock the lifting arm in
parking position.
•
Mower uncoupled from tractor must be supported on a support leg.
•
When operating the machine wear protective gloves and use the appropriate
tools.
•
Repair, maintenance and cleaning work should be carried out with the tractor's
engine turned off and the ignition key removed.
•
Regularly check the condition of the bolt and nut connections.
•
Regularly check the technical condition of the connections and the hydraulic lines.
There must not be any leaks of hydraulic oil.
•
During the warranty period, any repairs may only be carried out by authorised
Warranty Service.
•
In the event of any fault or damage whatsoever, do not use the mower until the
fault has been corrected. The machine must not be used when not in working
order.
•
Repair work should be carried out by persons trained and entitled to do so. This
work should be carried out using appropriate tools.
•
Should it be necessary to change individual parts, use only those parts indicated
by the Manufacturer. Non-adherence to these requirements may put the user and
other people's health and life at risk, and also damage the machine.
•
In the event of work requiring the mower to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the machine, stable and