Promise VTrak J5000 Series Скачать руководство пользователя страница 31

Страница: 31 / 99

Disk carrier release button

2.5” drive carrier front view

Empty 2.5” drive carrier front ready for HDD

2.5-

inch

Ard

iSk

riveS

The VTrak J5320 features 24 drive carriers designed to fit 2.5” drives. Notice that the carriers are oriented

vertically, with the carrier release button at the top. The lever mechanism to remove the carrier from the drive bay

works exactly the same as the 3.5” carriers, except they are positioned vertically rather than horizontally.

Cautions

Swing open the drive carrier handle before you insert the drive

carrier into the enclosure.
To avoid hand contact with an electrical hazard, remove only one

drive carrier a time.

1. Press the drive carrier release button. The handle springs open.

2. Grasp the handle and gently pull the empty drive carrier out of the enclosure.

3. Carefully lay the drive into the carrier with the power and data connectors facing

away from the carrier handle.

VTrak J5000 Series

Promise Technology

Содержание VTrak J5000 Series



































































































Результаты поиска

Содержание VTrak J5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Promise VTrak J5000 Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание VTrak J5000 Series

Отзывы:

Бренды по названию

Популярные бренды