Promise VSky H3970hDM Скачать руководство пользователя

Страница: 10 / 121

Warning

This server contains an internal Lithium Manganese Dioxide, or a Vanadium

Pentoxide, or an alkaline battery pack. There is risk of fire and burns if the

battery pack is not handled properly. To reduce the risk of personal injury:

•

Do not attempt to recharge the battery.

•

Do not expose to temperatures higher than 70°C.

•

Do not disassemble, crush, puncture, shorten external contacts, or dispose

in fire or water.

•

Replace only with the spare parts designated for this product.

Caution

This server is provided with an internal Lithium battery or battery pack.

There is a danger of explosion and risk of personal injury if the battery is

incorrectly replaced or mistreated.
For more information about battery replacement or proper disposal, con-

tact an authorized reseller or your authorized service provider.

Battery Replacement Safety

Batteries should not be littered along with the general household waste.

Please use the public collection system or return them to the supplier.

VSky H3970 Product Manual

Promise Technology, Inc.

Содержание VSky H3970hDM

























































































































Результаты поиска

Содержание VSky H3970hDM

Отзывы:

Похожие инструкции для VSky H3970hDM

Бренды по названию

Популярные бренды

Promise VSky H3970hDM, Руководство по эксплуатации продукта

Результаты поиска

Содержание VSky H3970hDM

Отзывы:

Похожие инструкции для VSky H3970hDM

Бренды по названию

Популярные бренды