Promise VSky H3970hDM, Руководство по эксплуатации продукта

Страница: 13 / 121

Tools Required
A cross screwdriver or a flat screwdriver is needed to install or remove the components in the server.
Power Cords
The power cord set included in the server meets the requirements for use in the country where the server was
purchased. If this server is to be used in another country, purchase a power cord that is approved for use in that
country.
The power cord must be rated for the product and for the voltage and current marked on the product’s electrical
ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating
marked on the product. In addition, the cross-sectional area of the wires must be a minimum of 1.00mm² or
16AWG, and the length of the cords must be between 1.8m (6 feet) and 3.6m (12 feet). If you have questions
about the type of power cord to use, contact an authorized service provider.
Caution
Route power cords so that they will not be walked on or pinched by items
placed upon or against them. Pay particular attention to the plug, electri-
cal outlet, and the point where the cords exit from the product.
xiii
Product Manual About