Promise VSky H3970hDM, Руководство по эксплуатации продукта

Страница: 85 / 121

Serial Port Console Settings Submenu Fields
Menu Fields Settings Comments
Advanced\ Serial Port Console Redirection \Console Redirection Settings
Terminal Type
[VT100]
[VT100+]
[VT-UTF8]
[ANSI]
Emulation: ANSI: Extended ASCII char set. VT100: ASCII
char set. VT100+: Extends VT100 to support color, function
keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode
chars onto 1 or more bytes.
Bits per second
[9600]
[19200]
[57600]
[115200]
Selects serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require
lower speeds.
Flow Control
[None]
[Hardware RTS/CTS]
[Software Xon/Xoff]
Flow control can prevent data loss from buffer overflow.
When sending data, if the receiving buffers are full, a 'stop'
signal can be sent to stop the data flow. Once the buffers
are empty, a 'start' signal can be sent to re-start the flow.
Hardware flow control uses two wires to send start/stop
signals.
Data bits
[7]
[8]
Data Bits.
Parity
[None]
[Even]
[Odd]
[Mark]
[Space]
A parity bit can be sent with the data bits to detect some
transmission errors. Even: parity bit is 0 if the num of 1's in
the data bits is even. Odd: parity bit is 0 if num of 1's in the
data bits is odd. Mark: parity bit is always 1. Space: Parity
bit is always 0. Mark and Space Parity do not allow for error
detection. They can be used as an additional data bit.
Stop Bits
[1]
[2]
Stop bits indicate the end of a serial data packet. (A start bit
indicates the beginning). The standard setting is 1 stop bit.
Communication with slow devices may require more than 1
stop bit.
72
VSky H3970 Product Manual Promise Technology, Inc.