![background image](http://html.mh-extra.com/html/promise-technology/vtrak-g1000/vtrak-g1000_product-manual_1617201023.webp)
10G NAS Client network setup Link Aggregation Option 1
1G Management link cable arrangement for Link Aggregation Option 1
For this option, all 1G LAN ports on both units must be connected to a Gigabit Ethernet switch that completes
the Management link to the VTrak A-Class.
To connect the 1G ports, follow these steps:
1. Attach Category 6 or better Ethernet cables to all ports 1 Gigabit Ethernet ports on the rear panel of all
G1000 devices.
2. Attach the other end of the cables to a 1 Gigabit Ethernet switch.
10G NAS Client cable arrangement for Link Aggregation Option 1
Complete the cable connections for a 10 Gigabit LAN data network if you plan to use the 10G LAN for data
connection to NAS clients.
To connect to the 10 Gigabit Ethernet LAN, follow these steps:
1. Attach Category 7 (recommended) or Category 6 Ethernet cables to both 10 Gigabit Ethernet ports on the
rear panel of all G1000 devices.
2. Attach the other end of the cables to the 10 Gigabit Ethernet switch used for the NAS Client network.
10G nas C
lient
network
setuP
19
Hardware Installation