Promise Technology VTrak G1000 Скачать руководство пользователя страница 50

Страница: 50 / 58

reate

mOunt

POInt

FOr

nas G

ateway

In the Setup Wizard procedure, the NAS Gateway is mounted to a file system automatically and then managed

by the VTrak A-Class. If the Fibre Channel connection is online, that file system is available for use to connected

NAS clients. The administrator then has the option to create additional mount points. If for example, another

file system is added, this new file system will need to be mounted manually. User read/write permission is still

configured through CIFS and NFS settings, but this is an additional tool for managing data storage resources for

the NAS.

To create a mount point for the NAS:

1. Click the gear icon and choose the

Create Mount Point

option.

2. Choose a file system and type a name for the folder used for the mount point.

3. Click on

Save

to create the folder in the file system and mount point for the Gateway.

The new mount point appears listed with the path of the file system mount point and Gateway mount

point.

VTrak G-Class Product Manual

Promise Technology

Содержание VTrak G1000

























































Результаты поиска

Содержание VTrak G1000

Отзывы:

Похожие инструкции для VTrak G1000

Бренды по названию

Популярные бренды

Promise Technology VTrak G1000, Руководство по эксплуатации продукта

Результаты поиска

Содержание VTrak G1000

Отзывы:

Похожие инструкции для VTrak G1000

Бренды по названию

Популярные бренды