Promise Technology ultratrak RM8000, Руководство пользователя

Страница: 61 / 94

Chapter 4: Front Panel Interface
55
Wipe Out Disk
The Wipe Out Disk menu allows the user to delete the area on the hard drive that
contains array information used exclusively by the UltraTrak controller. It may be
necessary to wipe out a disk if the disk was previously a member of an UltraTrak
array and you wish to use the disk in a different UltraTrak array. To wipe out a
disk, go to the
Configuration menu and select Configure Array ; then select
Advance Features and choose Wipe Out Disk .
1 MAXTOR Asng In Ary 1
2 IBM Asng In Ary 2
Where the values shown are simply examples.
3 MAXTOR Asng In Ary 3
4 IBM Asng In Ary 4
Press or to move these items on the LCD.
What you can do:
Press SEL : Displays a Wipe out disk confirmation message.
Press :
Moves the active message line up. ( Active is marked by *. )
Press :
Moves the active message line down. ( Active is marked by *. )
Press EXIT : Returns to the Advance Feature menu.
Caution
The Wipe Out Disk option will delete all data on the drive that is
selected.
Synchronize Array
The Synchronize Array menu allows the user to synchronize the data on each
drive. Synchronization is a maintenance procedure for fault tolerant arrays (RAID
1, 0+1, 3, 5, 30, and 50) to maintain data consistency on all drives. To
synchronize the array, go to the
Configuration menu and select Configure
Array ; then select Advance Features and choose Synchronize Array .
Array ID: 1
Only existing Array IDs are Displayed.
Array ID: 2
Press or to move these items on the LCD.
What you can do:
Press SEL : Displays a Synchronize Array confirmation message.
Press :
Moves the active message line up. ( Active is marked by *. )
Press :
Moves the active message line down. ( Active is marked by *. )
Press EXIT : Returns to the Advance Feature menu.