Promise Technology ultratrak RM8000, Руководство пользователя

Страница: 40 / 94

UltraTrak SX4000, SX8000 & RM8000 User Manual
34
Only trained and qualified personnel should remove the power supplies from the
UltraTrak units.
1. Switch the failed power supply OFF.
2. Remove the power supply locking screw.
3. Using the pull handle on the power supply pull it from the chassis.
4. Insert the new power supply into the chassis and switch the power supply
power ON.
5. Check that the Power LED indicator is illuminated.
6. Insert and tighten the power supply locking screw.
Warning
Risk of electrical shock. When either power supply module is removed
from the chassis, AC power is accessible at the circuitry in the power
supply chassis. Only trained and qualified personnel should remove the
power supplies.
Figure 15. Back of UltraTrak SX8000 showing the Power Supplies
(RM8000 is similar).
Power Supply Alarm
Reset Button
Module 2 Voltage
Select Switch
Module 1
Power Switch
Module 1
Voltage Select
Switch
Module 2
Power Switch
UltraTrak
Power Switch