Promise Technology ultratrak RM8000, Руководство пользователя

Страница: 25 / 94

Chapter 2: Getting Started
19
13. Press button to choose the Add/Remove Drives feature then press
SEL .
14. Use the and button to select each drive. Press SEL to toggle between
adding or removing a drive. Press EXIT when done.
15. Press SEL to Save Changes
16. Press SEL to create the array or press EXIT to cancel.
17. If you pressed SEL to create the array then you should see the message
“Array has been created.”
18. Switch the UltraTrak power off – wait 5 seconds and switch the power back
on.
You have successfully created an array manually. If haven’t already done so, you
need to select a SCSI ID before you can begin using the UltraTrak.