![background image](http://html1.mh-extra.com/html/promise-technology/ultratrak-rm8000/ultratrak-rm8000_user-manual_1617183033.webp)
Chapter 2: Getting Started
27
You may need to add one or more drives to the array before you can perform a
conversion. To add drives, see Expanding an Array, above.
Do the following steps to convert an array:
1. Press
the
SEL
button on the front panel.
2. Press button once to select
Configuration
, then press
SEL
.
3. Enter the password at the prompt (see Enter Password on page 15).
4. At
Configure Array
, press
SEL
.
5. Press button a few times to select
RAID Conversion
then press
SEL
.
6. At
Source Array ID
, press
SEL
.
Choose the array you wish to convert and press
SEL
.
7. Press
the button to select
Target RAID Level
then press
SEL
.
Choose the RAID level you wish to convert to, then pres
SEL
.
8. Press
the button three times to select
Save Changes
then press
SEL
.
Содержание ultratrak RM8000
Страница 1: ...UltraTrak SX4000 SX8000 RM8000 User Manual Version 8 0 Rev A ...
Страница 2: ...ii ...
Страница 74: ...UltraTrak SX4000 SX8000 RM8000 User Manual 68 ...
Страница 94: ...UltraTrak SX4000 SX8000 RM8000 User Manual 88 ...