Promise Technology Ultra66, Руководство пользователя

Страница: 14 / 24

PROMISE
TECHNOLOGY, INC.
11
ing your computer’s hardware configuration…” appears.
c) CD-ROM disk install:
boot from the CD-ROM disk and press
the “F6” key when the message “Setup is inspecting your com-
puter’s hardware configuration…” appears.
2 When the “Welcome to Setup” window is generated, press “Enter.”
3
In the “Setup Method” dialog box, press “Enter” to confirm
“Express Setup.”
4 Press “S” to configure an additional adapter.
5 Select “Other,” and then insert the “Ultra66 Driver” diskette (for
Windows NT 4.0) or the “Windows 3.51 Ultra66 Drivers” diskette
(for Windows NT 3.51; see “Windows NT” on page 11 for more
details) into drive A:.
6 Specify “A:”, and then press “Enter.” Follow the normal installation
procedure.
Installing Drivers with Existing Windows NT 3.51
Hard drives should not be connected to the Ultra66
controller card before performing the following proce-
dure. The Ultra66 drivers must be loaded on the system
hard drive (running under the existing hard drive con-
troller) before any hard drives are connected to the
Ultra66 controller card. See “Hard Drive Installation”
on page 4 for more details.
1 In “Program Manager,” double-click on “Windows NT Setup” in
the “Main” group.
2
In “Windows NT Setup,” select “Options,” and then choose
“Add/Remove SCSI Adapters…”
3 In “SCSI Adapter Setup,” press “Add…”
4 In “Select SCSI Adapter Option,” select “Other (requires a disk
from a hardware manufacturer)” in the “Adapter:” dialog box.
5
The “Insert Diskette” box will appear. Insert the “Windows NT
3.51 Ultra66 Drivers” (created from the “Ultra66 Drivers” diskette;
see “Windows NT” on page 11 for more details) diskette into drive
A: and type “a:\” in the dialog box.
6
The “Select OEM Option” dialog box will appear. Select “Promise
Section 3