Promise Technology Ultra66, Руководство пользователя

Страница: 10 / 24

PROMISE
TECHNOLOGY, INC.
7
8 Choose the “Driver” tab in the “Properties” window, and then
press the “Change Driver” button.
9
Insert the “Ultra66 Driver” diskette into drive A:.
0 In the “Select Hardware Type” dialog box, highlight “SCSI con-
trollers,” and then press “OK.”
¡ In the “Select Device” dialog box, choose “Have Disk.”
Ô
Type “A:\” in the text box and then press “OK.” A message inform-
ing you that Windows has found the “Promise Technology, Inc.,
Ultra66 IDE Controller” should appear.
£ Press “OK,” and then in the next window, press “OK” again.
¢
If Windows asks you whether or not you want to test if the device
can be removed safely, press “Cancel.”
ˆ Press “Yes” when asked if you want to restart your computer. Be
sure to eject the diskette from drive A:.
Windows 95 4.00.950B (OSR2)
1 After installing the Ultra66 controller card and configuring the
hard drives (see “Hardware Installation” on page 4), partition and
format your hard drive(s), if necessary.
2 Install Windows 95 normally.
3 After installation, go to the “Start” menu and choose “Settings.”
4 From the “Settings” menu, choose “Control Panel.”
5
In the “Control Panel” window, double-click on the “System” icon.
6 In the “System” window, choose the “Device Manager”tab.
7 In the hierarchical display under “Other Devices” is a listing for
“PCI Mass Storage Controller.” Choose it and then press the
“Properties” button.
8
Choose the “Driver” tab in the “Properties” window, and then
press the “Update Driver” button.
9 When asked if you want Windows to search for the driver, choose
“Yes (recommended).”
0
Insert the “Ultra66 Driver” diskette into the A: drive, then press
“Next.”
¡ When Windows informs you that it was unable to find the drivers,
press “Other Locations…”
Ô
In the “Select Other Location” dialog box, type “A:\”.
£ Press “OK.” Windows should inform you that it has found “Promise
Technology, Inc., Ultra66 IDE Controller.”
Section 3