FastTrak TX2000™ Series User Manual
26
Deleting An Array
The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not the
same as deleting data from the drives themselves. If you delete an array by accident (and
before it has been used again), the array can normally be recovered by defining the array
identically as the deleted array.
WARNING
: Deleting an existing disk array could result in its data loss. Make sure
to record all array information including the array type, the disk members, and
stripe block size in case you wish to undo a deletion.
FastBuild (tm) Utility 1.xx (c) 1995-2001 Promise Technology, Inc.
[ Delete Array Menu ]
Array No
RAID Mode Total Drv Capacity(MB) Status
Array 1
Stripe 2
16126 Functional
Array 2
Mirror
2
8063 Functional
Array 3
——
——
—— ——
Array 4
——
——
—— ——
[ Keys Available ]
[
↑
] Up [
↓
] Down [ESC] Exit [Del] Delete
1. To delete an array, highlight the Array you wish to delete and press the [Del] key.
2.
The View Array Definition menu will appear (see below) showing which drives are
assigned to this array.
FastBuild (tm) Utility 1.xx (c) 1995-2001 Promise Technology, Inc.
[ Define Array Menu ]
Array No RAID Mode
Total Drv Capacity(MB) Status
Array 1 Stripe
2
16126 Functional
Stripe Block: 64 KB Gigabyte Boundary: OFF
[ Drive Assignments ]
Channel:ID
Drive Model
Capacity (MB) Assignment
1 : Master
QUANTUMCR8.4A
8063
Y
2 : Master
QUANTUMCR8.4A
8063
Y
3.
Confirm yes to the following warning message with the <Ctrl-Y> key to continue array
deletion:
Are you sure you want to delete this array?
Press Ctrl-Y to Delete, others to Abort
4. After deleting the array, you should create a new array using Auto Setup or the Define
Array menu from the FastBuild Main Menu.
Содержание FastTrak TX2000
Страница 1: ...Ultra ATA 133 RAID Card User Manual Version 1 3 ...
Страница 46: ...FastTrak TX2000 Series User Manual 42 ...
Страница 60: ...FastTrak TX2000 Series User Manual 56 NOTES ...
Страница 70: ...FastTrak TX2000 Series User Manual 66 ...