ProMinent DULCOMARIN 3 Compact, Руководство по установке и настройке

Страница: 2 / 28

Table of contents
1 Introduction........................................................................... 3
2 Firmware update of the existing CAN modules on the
DULCOMARIN ® II................................................................. 4
2.1 Performing automatic updates for all modules............. 5
2.2 Performing manual updates.......................................... 5
2.3 End the software update of all modules........................ 6
2.4 Possible problems with the update............................... 6
2.5 Steps after a software update....................................... 7
2.5.1 M-/A-module.............................................................. 7
2.5.2 P-module................................................................... 7
3 Dismantling and assembly.................................................... 8
3.1 Disassembling the DULCOMARIN
®
II........................ 10
3.2 Assembling the DULCOMARIN
® 3............................. 10
3.2.1 Example: CAN bus cabling...................................... 11
4 Commissioning the DXMaX module on the DULCO‐
MARIN ® 3............................................................................ 12
4.1 Entering the number of swimming pools..................... 12
4.2 Manual assignment of the CAN modules................... 12
4.3 Assignment of CAN modules...................................... 13
4.4 Overview of all connected CAN modules................... 14
4.5 Final configuration...................................................... 14
5 Configuring the M-module (DXMaM, measurement
module)............................................................................... 15
5.1 Digital inputs 1 ... 3..................................................... 15
5.2 Measuring inputs........................................................ 16
5.3 M-module diagnostic................................................... 17
5.4 Factory setting of the M-module................................. 17
5.5 Configuring Eco!Mode operating mode...................... 17
5.6 Reasons for triggering Eco!Mode............................... 18
5.7 Synchronising DXMaM settings.................................. 18
5.8 M-module changes in the DULCOMARIN
® 3............. 18
6 Configuring the A-module (DXMaA) (actuator module)...... 19
6.1 Frequency outputs 1 ... 3............................................ 19
6.2 Digital inputs 1 ... 3..................................................... 19
6.3 mA outputs 1 ... 4........................................................ 20
6.4 Configuring the mA outputs........................................ 21
6.5 A-module diagnostic................................................... 22
6.6 Factory setting of the A-module.................................. 22
6.7 Synchronising DXMaA settings.................................. 22
7 Configuring the P-module (DXMaP) (power module)......... 23
7.1 Relay outputs 1 ... 4.................................................... 23
7.1.1 Solenoid valve relay................................................. 24
7.2 Synchronising settings................................................ 25
8 Additional documentation.................................................... 26
Table of contents
2