ProMinent DULCOMARIN 3 Compact, Руководство по установке и настройке

Страница: 8 / 28

3 Dismantling and assembly
Carry out the actions described in the chapter
Ä
Chapter 2 ‘Firm‐
ware update of the existing CAN modules on the DULCOMARIN ®
II’ on page 4 in advance to change the DULCOMARIN
®
II to a
DULCOMARIN ® 3. These updates are currently not possible with
the DULCOMARIN ® 3; the DULCOMARIN ® II is urgently needed
for the updates.
Make sure that the electronic set-up of the system is retained.
Every CAN bus module remains assigned to each swimming pool.
Document the serial numbers of the individual modules for the indi‐
vidual swimming pools for subsequent assignment.
An overview of the modules assigned to the pool in the DULCO‐
MARIN ® II can be obtained via:
n
[Config (F4)] ➨ [BUS (F5)] ➨ ‘Overview of pool 1 ... 16’
n
Use the arrow keys ◄ or ▶ to select the respective swimming
pool.
n
Document the assignment, for example, by taking a photo on
your smartphone.
n
Press ESC to exit the menu.
Note that there is no P-module in the DULCOMARIN ® 3. Connect
the connectors for the DULCOMARIN ® II alarm relays and pumps
to the P-module using the module board in the DULCOMARIN ® 3.
When doing so, refer to the operating and assembly instructions for
the DULCOMARIN ® 3.
Dismantling and assembly
8