manualshive.com logo in svg

ProMinent DULCODOS DSWb S110, Руководство по сборке и эксплуатации, Страница: 26 / 56

Поделиться
Скачать
ProMinent DULCODOS DSWb S110 Скачать руководство пользователя страница 26

3 

Storage and Transport

CAUTION!
–

Prior to storage or transport, ensure that the system

is free from feed chemical and water

–

Flush out the media carrying parts including the

hoses using clean pure water

–

Store and transport the system in its original pack‐

aging.

–

Also protect the packaged systems against damp,

exposure to chemicals and mechanical effects

–

Please also observe the operating instructions for fit‐

tings and other units, such as sensors, filters,

metering pumps ...

Storage temperature: 0 ... 55 °C
air humidity: < 95% relative air humidity, non-condensing
Humidity: None. Rain and condensation not permitted.
Other: No dust, no direct sunlight.

NOTICE!
If the system is stored as an assembly with other compo‐

nents, then the storage and transport conditions should

be appropriate for the component with the least resist‐

ance to external influences.

Ambient conditions for storage and trans‐

port

Storage and Transport

 

 

 

26

Содержание DULCODOS DSWb S110

























































Отзывы:

Нет отзывов