manualshive.com logo in svg

ProMinent DULCODOS DSWb S110, Руководство по сборке и эксплуатации, Страница: 25 / 56

Поделиться
Скачать
ProMinent DULCODOS DSWb S110 Скачать руководство пользователя страница 25

In the event of an electrical accident, disconnect the mains cable from the

mains/power supply or press the emergency cut-off switch fitted on the

side of the system. If feed chemical is escaping, switch off the pump by

pressing 

[Stop/Start]

. If necessary ensure that the hydraulic system

around the pump is at atmospheric pressure. Adhere to the safety data

sheet for the feed chemical.

2.4  Intended use

Intended use
Only use the DSWa metering system to meter liquid

metering chemicals in hydraulic systems.
The DSWa metering system is not intended to meter

gaseous or solid media.
Only use the unit in accordance with the technical data

and specifications provided in these operating instruc‐

tions and in the operating instructions for the individual

components (such as sensors, fittings, calibration

devices, metering pumps etc.).
Do not operate the system under conditions other than

those described in the technical data!
Only allow adequately qualified and technically expert

personnel to operate the metering system.
All other uses or modifications are prohibited.

Information in the event of an emergency

Safety and responsibility

 

 

 

25

Содержание DULCODOS DSWb S110

























































Отзывы:

Нет отзывов