9
USER GUIDE //
ELECTRICAL STRETCHER SUPPORT SERIES: PB460/0 - PB460/1 - PB460/2
Review 03/20
·
All those who modify or have modified, prepared or have prepared medical devices in such way that
they no longer serve the purpose for which they were designed, or no longer provide the desired servi-
ce, must satisfy the valid conditions for the introduction of these in the market.
·
Register and store with these instructions: lot number, place and date of purchase, first date of use,
date of checks, name of operators and any other comments.
·
Be sure to take all necessary precautions to avoid the dangers that may arise as a result of contact with
blood or body fluids.
·
Do not store the device under heavy objects that could cause structural damage.
·
The device should be stored indoors, in a dry and clean place. Avoid exposure to direct sunlight; it is
possible to obtain a maximum of two supports, with its original cardboard box and its wooden pallet in
good condition. Stack if these conditions are not met is prohibited.
·
Store and transport the product in its original packaging.
·
When the product is being used, the assistance of qualified personnel must be guaranteed.
·
Attention: laboratory tests, post-production tests, instruction manuals cannot always consider all pos-
sible scenarios of use. This means that, in some cases, the performance of the product could have signi-
ficantly different from results to date obtained. Instructions are continually updated and are under the
strict supervision of fully qualified personnel with the appropriate technical formation.
·
In addition, both public and private services are obliged to inform the manufacturer of any measures
that should be adopted in order to take the necessary steps to guarantee the safety and health of pa-
tients and users of any medical device.
·
The operator must always use adequate personal protection, such as gloves, during all verification
and maintenance procedures.
·
The frequency of inspection is determined by factors such as legal requirements, type of use, frequen-
cy of use, environmental conditions during use and storage.
·
Promeba S.L.
disclaims any liability for any damage, direct or indirect, that is the result of incorrect
repairs or use of products made by
Promeba S.L.
Repairs must necessarily be carried out by an au-
thorized
Promeba S.L.
service centre, which in using original spare parts will provide a quality repair
service in strict accordance with the technical specifications given by the manufacturer.
Promeba S.L.
disclaims any liability for any damage, direct or indirect, which is a result of improper use of spare parts
and/or otherwise of any repairs made by an entity other than the Promeba service centres authorized
to repair or make substitutions on this product and parts and/or otherwise of any repairs made by an
entity other than the Promeba service centres authorized to do so; the warranty will also be invalidated.
02
WARNINGS
