19
USER GUIDE //
ELECTRICAL STRETCHER SUPPORT SERIES: PB460/0 - PB460/1 - PB460/2
Review 03/20
03
INSTALATION
03.5 Connection to the mains power supply
To make the connection follow the steps below.
Be particularly careful when connecting the bench to the required voltage of 12V direct current and
do not leave cables in passageways and or moving elements.
A
Power chord
12V. DC.
B
Remove the plastic end of the red and
black cables with a thread peeler to
make the connection.
C
Use a power strip and a flathead
screwdriver to connect the red and
black cables with the outlet of the
ambulance.
To make the connection locate the black cable located at the front side of the
bench.
MAKE SURE YOU HAVE THE POWER LINE PROPERLY PROTECTED AND ENSURE THAT THE
POWER ALONG THE LINE IS STABLE.
