11
USER GUIDE //
ELECTRICAL STRETCHER SUPPORT SERIES: PB460/0 - PB460/1 - PB460/2
Review 03/20
02.2 Specific warnings
·
Establish a maintenance program and periodic tests, identifying a reference employee. The person en-
trusted with the ordinary maintenance of the device must guarantee the basic requirements foreseen
by the manufacturer in the user manual.
·
Use only accessories/spare parts original or approved by
Promeba, S.L.
, in order to carry out any ope-
ration without altering or modifying the device; otherwise we assume no responsibility for the correct
operation or damage resulting from the device to the patient or the operator and the warranty will be
considered void, in accordance with the compliance of the Medical Device Directive 93/42/EEC.
·
The stretcher used together with the stretcher support, must be installed in accordance with the spe-
cifications provided by the manufacturer and ensuring its compatibility with technical specifications of
the stretcher support.
·
Promeba S.L.
will not be responsible if an unauthorized stretcher anchor is used.
·
Do not disassemble parts or components of the device, except those that are expressly indicated in
this manual.
·
Do not apply devices that may interfere with the operation of the stretcher support or that may hinder
your movements.
·
Do not change the load after the suspension function has been activated (if the device is provided
with this function)
·
Promeba S.L.
will not accept responsibilities in the case that the support is used in the conditions
mentioned above, considered as improper use.
·
Always disconnect the electric stretcher support from the power supply during maintenance and
cleaning.
·
Check that the configuration and the installation of the stretcher support are suitable for the stretcher
that is being used to ensure the proper use of the stretcher.
·
Always wear gloves during maintenance procedures.
·
When the stretcher is loaded or unloaded from the stretcher support, the operator may have to hold
heavy loads. For this reason, it is necessary to verify that both devices have been correctly adjusted to
ensure that all operations are carried out safely. In case of heavy loads, the presence of at least 2 ope-
rators is required.
·
The laws relating to safety in the workplace must always be respected. Promeba S.L. is not responsible
for damages caused by non-compliance with these requirements.
02
WARNINGS
