15
USER GUIDE //
ELECTRICAL STRETCHER SUPPORT SERIES: PB460/0 - PB460/1 - PB460/2
Review 03/20
03.2 Device’s preparation
On receipt of the product it is advised:
·
Make sure that the packaging is intact and has no signs of impacts, falls and is not wet.
·
Remove the packaging and distribute the material such that all components are visible.
·
Verify that all components / parts in the attached list are present.
·
General functionality of the device.
·
Verify that the device does not present any type of damage.
·
Make sure that the vehicle in which you wish to install the device is manufactured in
accordance with EN 1789.
·
The device is supplied in an intermediate position to facilitate installation. Do not connect the
device to the power source before it has been fixed to the ground.
·
Do not disassemble the parts or components of the device except as indicated in this manual.
If tampering is found and / or any type of operation other than that described in this manual,
the warranty will be invalidated.
If the above conditions are met, the device can be considered ready for use; Otherwise, you must im-
mediately remove the device from the service and contact the manufacturer.
03
INSTALATION
