20
SOFTWARE UPDATE
For a control unit software upgrade, use the special serial cable supplied by the manufacturer,
connect it to the control unit through the Serial port (see electronic board layout) and to serial
port RS232 of any Personal Computer (PC).
The software Upgrade can be done by transferring the new software from the computer to the
CPU using M16C Flasher.
Once you have connected your PC (USB or RS 232) to the CPU (Serial) with the special cable
code: IC577400056 (USB) or IC577400032 (serial), power the machine.
After installing the M16C Flasher it is necessary:
- to start the program and press the Settings button
- to configure setting as follows:
This configuration shall be executed for the first time only.
- Close Settings window
- Press the arrow next to Settings button and select Prog new file…
- Select the program Easymix120plus*
After a software upgrade, offsets of the probes have to be reprogrammed.
