Promac JDT-2512V, Руководство по эксплуатации

Страница: 5 / 40

4. Machine specifications
4.1 Technical data
JDT-2512V:
Drilling Capacity Mild Steel 23mm
Tapping Capacity Mild Steel M14
Chuck Size
…B16
1-16mm
Spindle Travel 100mm
Distance chuck to Base 500mm
Distance Chuck to Table (max) 255mm
Table Size
246×278mm
Table Travel 224mm
Table Tilt ± 45 °
Work Table Weight Capacity 60kg
Head Travel 345mm
Spindle Taper MT-2
Column Diameter/ Material Ø 70mm /
Cast Iron
Number of Spindle Speeds
Variable
Pulleys Material Cast Iron
Spindle Speeds Range 100-2100RPM
Base Size
340×520mm
Base Work Area 258×275mm
Table / Base Material Cast Iron
Head Stock Material Cast Iron
Spindle Distance to Column 203mm
Overall (LxWxH)
690×410×1040mm
Net weight 91 kg
Mains
400V ~3L/PE 50Hz
Output power 0,55 kW S1
Reference current 1,8A
Extension cord (H07RN-F): 4G1,0mm²
Installation fuse protection
10A
JDT-3216V:
Drilling Capacity Mild Steel 32mm
Tapping Capacity Mild Steel M16
Chuck Size
…B16
1-16mm
Spindle Travel 134mm
Distance chuck to Base 1100mm
Distance Chuck to Table (max) 760mm
Table Size
380×416mm
Table Travel 760mm
Work Table Weight Capacity 60kg
Spindle Taper MT-3
Column Diameter/ Material Ø 98mm /
Steel Tube
Number of Spindle Speeds
Variable
Pulleys Material Cast Iron
Spindle Speeds Range 100-2100RPM
Base Size
440×648mm
Base Work Area 350×357mm
Table / Base Material Cast Iron
Head Stock Material Cast Iron
Spindle Distance to Column 246mm
Overall (LxWxH)
740×460×1030mm
Net weight 230 kg
Mains
400V ~3L/PE 50Hz
Output power 0,75 kW S1
Reference current 2,5A
Extension cord (H07RN-F): 4G1,0mm²
Installation fuse protection
10A
4.2 Noise emission
Acoustic pressure level (EN 11202):
Idling at maximum speed
75 dB (A)
The specified values are emission levels
and are not necessarily to be seen as
safe operating levels.
As workplace conditions vary, this
information is intended to allow the user
to make a better estimation of the
hazards and risks involved only.
4.3 Content of delivery
B16 1-16mm drill chuck with arbor
(MT-2 for JDT-2512V, MT-3 for JDT-
3216V)
Head rising crank and handle
Operating tools
Operating manual
Spare parts list.
5. Transport and start up
5.1 Transport and installation
The machine will be delivered in a
reliable carton(JDT-3216V with extra
pallet underneath).
For transport use a forklift or hoist.
Make sure the machine does not tip or
fall off during transport.
Danger of tipping due to high gravity
center!
During handling, the machine shall be
lifted only in vertical direction.
Please refer to instruction manual in
specification and machine weight to
arrange handling manner. Be sure to
use capable fork - lifter or hoist to lift of
machine. The handling and
transportation shall be carried out by
qualified persons. Fork - lift or hoist can
be used in handling and shall be
operated by qualified driver.
Before handling, make sure all movable
parts are secured in their position and
all movable accessories should be
removed from machine. The steel rope
should average pull the machine head,
table and column tightly.
Keep all the processes in a carefully
and slightly condition. Bump or crash
are strictly prohibited. It will cause
precision shift and electronic controller
damaged.
5.2 Positioning the Machine
I. Owing the machine is heavy,
please use crane to pull it out from
the carton box.
II. The head and the worktable of the
machine can be rotated 360°, so
choose a location with enough
space and solid foundation.
III. Clean all rust protected surfaces
with a mild solvent e.g. petroleum.