ProLights Cyber24, Руководство пользователя

Страница: 32 / 36

CYBER24
14
Display
1. The 3-Digit Segment Display is used to display intensity percentage or absolute DMX value.
2. For change between percentage and absolute value: press and hold the Shift Button. While holding
down the Shift button press the % or 0-255 Button switch between percentage and absolute values.
Blind and home
Blind function takes channels temporally out from a chase, when the chase is running, and giving the man-
ual control over the channel; Press and hold the Blind Button and tap the relative Flash Button you want to
temporarily take out of the chase.
To return to normal chase again press and hold the Home Button and push the Flash Button want to return
to normal chase.
Park
CHNS SCENES Mode, press down the button you can change the chasing mode of programs between Sin-
gle Mode and Mix Mode.
Add e kill
The ADD/KILL Button changes the mode of the flash buttons. Normally the flash buttons are in Add mode,
whereas pressing any flash button will not kill other scenes, allowing multiple scenes functioning on at a
time. Kill mode is activated by pressing the Add/Kill button and illuminating the led above it. Press any flash
button will kill other active SCENE or Program. In this Mode, the killed program doesn’t stop running but
can not be used in output mode.
Double preset
1. Press Mode Select Button to enter A Double Preset Mode.
2. In this mode, Channel Sliders 1-12 and channel sliders 13-24 both control Channel 1-12
3. Master A controls channel Slider 1-12 while Master B controls Channel Sliders 13-24.
4. In this Mode, no scene could be recorded.