ProLights Cyber24, Руководство пользователя

Страница: 26 / 36

CYBER24
8
1. Record enable.
2. Push Master A & B to maximum position and Fade slider to top.
3. Tap the Mode Select button to select 1-24 Single mode.
4. Push Channel slider 1 to the top position, its led light at full intensity.
5. Tap the Record button to program this step into memory.
6. Repeat steps 4 and 5 until you’ve programmed Channel sliders 1-16.
7. Tap the Page button causing Page 1 led lights.
8. Tap the Flash button 15 while holding down the Record button, all leds will flash indicating you’ve pro-
grammed the chase into memory.
- 4 - EDITING
4.1 Edit enable
1. Record enable.
2. Use the Page button to select the page the program you wish to edit is on.
3. Tap the Mode Select button to select CHNS/SCENES.
4. Press and hold down the Edit button.
5. While holding down the Edit button, tap the Flash button that corresponds to the program you wish to
edit.
6. Release the Edit button, the relevant scene led should light indicating you are in the Edit mode
4.2 Deleting a program
1. Record enable.
2. Use the Page button to select the page the program you wish to erase is on.
3. While holding down the Edit button, tap the Flash button(13-24) twice.
4. Release the two buttons,all leds flash, indicating the program is erased.
4.3 Deleting all program
1. Press and hold the Record button.
2. Press the Flash buttons 1, 4, 2 and 3 in sequence while holding the Record button. All leds will indicating
all programs stored in memory have been erased.
4.4 Deleting of one or more scenes
1. Record enable.
2. Record a scene or scenes.
3. If you are not satisfied with the scene or scenes, you may tap the Rec Clear button while pressing and
holding the Record button, all leds will flash, indicating the scenes have been cleared.
4.5 Deleting of one or more steps
1. Enter the Edit mode.
2. Tap the Step button to scroll to the step you wish to delete.
3. Tap the Delete button when you reach to the step you wish to delete, all leds will flash briefly indicating
the deletion of the step.
4. Continue steps 2 and 3 until all the unwanted steps have been deleted.