PROKORD SMART HOME W411-E J300, Руководство пользователя

Страница: 13 / 15

24 25
Troubleshooting
Solution Prompt Tone
Error 1: Oh dear! I cannot find the dust collector
Error 2: Please check if the radar on top has been covered or blocked
Error 4: Please scrub the cliff sensor, and restart me from
a new location
Error 3: Please place me in a new location and try again
Error 5: Please scrub the front sensor, and restart me from
a new location
Error 6: Please scrub the right-hand sensor, and restart me
from a new location
Error 7: Please scrub the radar housing on top, and restart me from
a new location
Error 8: Please check if the bumper has been blocked in some way
Error 9: Please, clean the dust box and filter
Error 11: I’m stuck, please help me!
The robot is stuck
The dust box is full or the filter screen needs to be replaced
The edge or collision sensor is stuck
The radar avoidance sensor is dirty or covered
The wall sensor is dirty or covered
The infrared avoidance sensor is dirty or covered
The cliff sensor is covered or placed at height
Pick the robot up or hang it in the air
Cleaning is triggered when the dust box is taken out
The top radar is covered or placed in an open area
(there is no obstacle within an area of 6x6m2
After error 9 is issued, user takes out the duck chamber
and error 10 is triggered
Error 10: Dust container has been removed, please clean
the container and filter
Troubleshooting
Solution Prompt Tone
The robot is tilt Error 12: Please place me correctly!
Error 13: Please check if my wheels have become blocked somewhere
Error 14: Please check if the main brush has become stuck
Error 15: Please check if the side brushes have become stuck
Error 16: What’s going on? Where is the docking station?
Error 17: Oh dear! Program error, please restart me
Error 18: Error encountered initiating shutdown
Error 19: Low battery, please recharge
Error 20: To shut me down, please place me away from the docking station
The driving wheel is twined or stuck
The main brush is twined or stuck
The side brush is twined or stuck
The charging base cannot be found or is not plugged in
Abnormalities are caused by unknown breakdown, restart the robot
The robot reminds the user and shuts down automatically or is recharged
The robot shuts down when charged on the charging base
When the battery level is too low and the robot is not on the charging
base, cleaning is triggered (the battery level is lower than 10%)