PROKORD SMART HOME W411-E J300 Скачать руководство пользователя страница 12

22

23

Basic Parameters

Parameter

160x143x80mm

24W

24W

Item

Overall dimension

Rated power

Rated output

J300

350x350x100mm

3.4kg

5200mAh

14.4V

50W

Item

Model

Overall dimension

Product weight

Li-battery

Rated voltage

Rated power

Machine

Charging base

Common Problems

Solution

Problem

In case of a low battery level, please place the robot on the charging base and align it at the electrode plate,

the machine will be started automatically (if the robot is completely powered off, it can be started automatically

after charged for a while)

If the environment temperature is lower than 0°C or higher than 50°C, please use it at a temperature of 0-40°C
Please move the robot away, check whether the indicator light of the charging base lights on and confirm both 

ends of the power adapter of the charging base are connected well

In case of poor contact, please clear the charging base shrapnel and the charging contact on the robot or push

the side brush aside
The robot is too far away from the charging base, please put the robot near the charging base

and make another try

Shut down and restart the robot

Main brush, side brush or wheel may be twined by foreign matters, please shut down the robot 

and remove foreign matters

The dust box is full, please clear it
The filter screen is blocked, please clear or replace it
The main brush is twined by foreign matters, please clear it

WiFi signas is bad, please ensure is covered by WiFi signal
WiFi is connected abnormally, please reset WiFi, download the latest APP and try to reconnect it
Password is inputted incorrectly
The router is available for 5G frequency band, the cleaning robot is available for 2.4G frequency band only

In case of a low battery level, fixed-time cleaning can be started only when the battery level is no less than 30%

The robot consumes a little power if it is always placed on the charging base  and it enables the best 

performance of battery

The lithium battery can be used immediately after being charged  and has no memory effect

Whether the robot needs to be charged 

for 16h for the first three times

Whether the robot consumes power if 

it is always placed on the charging base

Fixed-time cleaning fails

WiFi cannot be connected

Cleaning ability declines or dust

falls out

Abnormal noise in use

Abnormal behavior

The robot cannot be recharged

The robot cannot be charged

The robot cannot be started

Содержание SMART HOME W411-E J300
















Отзывы: