ProKlima GPC12AJ, Руководство по эксплуатации

Страница: 57 / 384

HEALTH SAVE button
7
HEALTH FUNCTION:
After pressing HEALTH button, remote controller will switch circularly as below:
"HEAL TH"→"AIR"→"AIR HEA L TH"→"no display"
● When selecting "HEALTH" by remote controller, HEAL TH function will be started up.
● When selecting "AIR" by remote controller , AIR function will be started up.
● When selecting "AIT HEALTH", AIR and HEA L TH function will be started up.
● When there ’ s no display on remote con troller, AIR and HEA LTH function will be
turned off.
● AIR function is applicable for some models.
Introduction for buttons on remote controller
Note:
When selecting " " with remote controller, it’ s auto swing. Horizontal louver of air
conditioner will swing up&down automati c ally at the maximum angle.
When selecting "
、 、 、 、
swing. Horizontal louver of air conditioner will stop at that position as shown by the
icon to swing.
● When selecting " " with remote controller, it ’ s auto swing. Horizontal louver of
air conditioner will swing left&right automatically at the maximum angle.
● When selecting "
、 、 、 、
"
position swing. Horizontal louver of air conditioner will stop at that position as
shown by the icon to swing.
● When selecting
Note:
There is no this function for the units. If press this key, the main unit will
click, but it also runs under original status.
" ", it’s the circulating swing. Horizontal louver of
air conditioner will swing circularly according to the angle as shown by the icon.
(swing angle is displayed dynamically)
6
button
no display
(horizontal louvers stops
at current position)
(swing angle is dis-
played dynamically)
● Press this button to start or stop left & right swing function. The remote controller
defaults to simple swing condition.
● Press + button and button at the same time at unit OFF to switch between
simple swing and static swing; blinks for 2 seconds.
● In static swing condition, pressing button, the swing angle of left & right louver
changes as below:
● If the unit is turned off during swing operation,the louver will stop at present
position.
55