REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual TEKNA TILT 2.0 24
SERVICE MANUAL
STANDARD REMOVABLE ARMREST
HEIGHT ADJUSTMENT
The blade
A
has, in its vertical part, a series of holes where to screw the bolt
C
. This bolt engages into the hollow
D
of the support
B
. There-
fore, to change the height, just remove the bolt
C
and screw it in another hole.
If you need to lower the armrest, the side guard could touch the support
B
and the upper side of the tilting body
E
and thus impede the ad-
justment. In such case, it is necessary to cut the lower side of the side guard following the same drawing.
Remove the two bolts
F
and draw the cutting line.
Saw the side guard along the line and round off the edge with a scissor's blade or with fine sand paper.
Assemble the side guard. The holes for the bolts
F
remain the same.
WARNING: do not tighten the bolt
C
and
F
excessively: it may damage the threaded hole until making it unusable
.
A
B
A
B
C
D
A
E
Possiible cutting line
F
