REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual TEKNA TILT 2.0 21
SERVICE MANUAL
BACKREST HEIGHT
With fix or reclining aluminium tube
Screw off the bolt/washer/nut
A
.
The inner tube can slide into the outer tube for 8 cm until the point
B
where the outer tube’s thickness changes from 2 to 3 mm.
With the same inner tube, you can fix it maximum 4.5 cm higher, whereas, if you need to lower it, you may need to cut off the exceeding
part.
Once you find the good adjustment, fix the tube with the bolt/washer/nut
A
.
With folding titanium tube
The inner diameter of the tube is constant and it allows the inner tube to slide all the way down the outer tube.
Screw off the bolt/washer/nut
A
.
The bolt
C
that fixes the support of the handlebar tube can fix the inner tube, too. In that case, but also in the case that bolt impeed the
inner tube from sliding down, remove the bolt
C
.
Slide the inner tube up or down to the necessary height.
Insert the bolt
C
(if you removed it), the bolt/washer/nut
A
and fix the tube.
Pay attention when fitting the bolt
C
into the threaded hole of the support.
Should you irredeemably damage the thread of such hole, you can repass it with a 5 mm drill pin and fix the support with a longer bolt,
washer and nut.
5.5 cm
C
A
A
8 cm
B
Threaded hole
FOLDING TITANIUM TUBE
FIX OR RECLINING ALUMINIUM TUBE
