REHATEAM s.r.l.—vicolo Negrelli
5
—
31040
Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual JOKER JUNIOR 2.0 19
SERVICE MANUAL
FOOTPLATE
You can adjust this type of footplate in height, angle and depth.
HEIGHT ADJUSTMENT
1) Sliding the system
Loosen the four bolts
B
of both supports
A
.
Slide the footplate upward or downward to the
necessary height.
Fix one of the two supports
A
tightening the four
bolts
B
evenly.
Check the two supports are at the same height
and tighten the second support.
2) supports orientation
You can orientate the supports
A
facing upward or downward.
Therefore, reversing their orientation, you can reach other footplate distances.
To reverse the orientation, you need to detach the whole footplate unit from the frame.
To do so, remove the four bolts
B
of both supports
A
and detach the fixing plate
C
.
Now, remove the footplate unit.
(In this case, we start with the footplate with the supports facing downward).
A
B
A
Screw off the bolt
D
and pull off the support
A
from the tube
E
. The cap
F
comes off, too.
If the support is hard to come off, you can gently use a mallet.
Repeat the same operation for the other side.
Now, reverse the assembly of the supports. You will notice their changed orientation.
To mount the footplate unit, insert the support
A
on the tube
E
. then, insert the cap
F
into the tube
E
.
Now, align the support’s hole to the threaded hole of the cap. To align the holes, you can help yourself with a screw driver.
Carefully insert the bolt
D
and tighten it.
Repeat the same operation for the other side.
Footplate with supports
facing downward.
C
A
A
D
E
A
Follows next page
F
Footplate with supports
facing upward.
F D E A
Threaded hole
