TO SET UP WHEELCHAIR
Open wheelchair by tilting to one side and pushing down on
seat rail until opened.
Attach Footrests by aligning holes on tabs at top of Footrests
with hinge pins on outside of front frame, then swing Footrests
to front until Footrest Release Levers lock into place.
Adjust Footrest length (while user is seated) by loosening the
cam lever just above the Footplate, pushing in the adjustment
button and sliding the inner tubing up or down to desired
setting until the adjustment button protrudes fully from the
adjustment hole. Then snap cam lever back into place.
Make sure the Footplate is at least 2.5” from the floor for
proper clearance.
TO FOLD WHEELCHAIR FOR STORAGE
Make sure the Footrests are in the forward locked position with the
Footplates in the vertical position or REMOVE the Footrests by pulling
the Release Levers, swinging the Footrests outward and lifting them
from the hinge pins.
Standing behind the chair, grab the center of the seat and pull up until
closed.
OPERATING WHEEL LOCKS
Engage by pushing the levers forward until they lock into place and
disengage by pulling back on the levers until the wheels roll freely.
Clean frame with a damp cloth and dust weekly.
Clean upholstery and armrests with mild soap and
water.
Never use abrasive cleansers or scouring pads.
If exposed to liquid, dry the wheelchair thoroughly as
soon as possible.
If any component appears worn or is not working
properly, contact an authorized dealer for repair
and/or appropriate replacement parts.
Solid rubber tires need minimal maintenance, but
should be cleaned occasionally with a damp cloth.
If tires become severely worn or cracking appears,
contact an authorized dealer.
Wheels and Casters should be checked periodically
and adjusted and lubricated as needed by an autho-
rized dealer.
Lifestyle Mobility Aids
www.lifestylemobilityaids.com
V2: 3/05/21
1-877-843-6464
3200 Tyrone Blvd N
St. Petersburg, FL 33710
