manualshive.com logo in svg

ProGear Hendrickson HN 422FR, Руководство по обслуживанию, Страница: 41 / 41

Поделиться
Скачать
ProGear Hendrickson HN 422FR Скачать руководство пользователя страница 41

www.hendrickson-intl.com

Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not refl ected.

17730-285 Rev A 12-12  

© 2012 Hendrickson USA, L.L.C.  All Rights Reserved 

Printed in United States of America

Truck Commercial Vehicle Systems 

1.866.755.5968 (Toll-free U.S. and Canada) 

800 South Frontage Road 

1.630.910.2800 (Outside U.S. and Canada)

Woodridge, IL 60517-4904 USA 

Fax 1.630.910.2899

SECTION 10

Troubleshooting Guide

HN

®

 FR SERIES

CONDITION

POSSIBLE CAUSE

CORRECTION

Suspension has harsh or 
bumpy ride

Incorrect auxiliary spring adjustment

Adjust auxiliary spring to proper setting. See Auxiliary Spring 
Adjustment in the Preventative Maintenance Section of this 
publication.

Damaged auxiliary spring assembly

Replace auxiliary spring assembly.

Damaged bolster spring assembly

Replace bolster spring assembly.

Vehicle leans

Incorrect auxiliary spring adjustment

Adjust auxiliary spring to proper setting. See Auxiliary Spring 
Adjustment in the Preventative Maintenance Section of this 
publication.

Damaged auxiliary spring assembly

Replace auxiliary spring assembly.

Damaged bolster spring assembly

Replace bolster spring assembly.

Irregular tire wear

Incorrect axle alignment

Align axles. Refer to vehicle manufacturer’s specifi cations.

HN

®

 FR Series

Pro Gear and Transmission  • 906 W. Gore St. Orlando, FL 32805 • 1 (877) 776-4600 / (407) 872-1901 • [email protected]

Содержание Hendrickson HN 422FR










































Отзывы:

Нет отзывов