manualshive.com logo in svg

ProGear Hendrickson HN 422FR, Руководство по обслуживанию, Страница: 24 / 41

Поделиться
Скачать
ProGear Hendrickson HN 422FR Скачать руководство пользователя страница 24

HN

®

 FR Series

17730-285 

23 

Component Replacement

SECTION 8

Component Replacement

FASTENERS

When servicing a vehicle Hendrickson recommends replacing all removed fasteners 
with new equivalent fasteners. Maintain correct torque values at all times. Check torque 
values as specified. See Hendrickson’s Torque Specifications Section of this publication. 
If non-Hendrickson fasteners are used follow torque specifications listed in the vehicle 
manufacturer’s service manual. 

SERVICE HINT 

When replacing components on the HN FR suspension, work one side of the vehicle at a time 
and only lift the vehicle enough to remove load and component. This will help maintain axle 
orientation and help reduce labor time.

SADDLE

DISASSEMBLY

1.  Chock the front wheels of the vehicle. 

2.  Remove the fasteners from the upper anchor plate assembly and auxiliary spring mounting 

plate, see Figure 8-1. Remove anchor plate.

3.  Remove the three (3) carriage bolts securing the auxiliary spring to the saddle assembly. 

Remove the auxiliary spring, auxiliary spring mounting plate and auxiliary spring mounting 
plate shim and ½" washer, see Figure 8-1.

FIGURE 8-1

4. Loosen, 

DO NOT

 remove, the upper eight (8) 

7

⁄

16

" fasteners connecting the bolster springs 

to the saddle assembly, see Figure 8-2.

5.  Remove the lower eight (8) 

7

⁄

16

" fasteners connecting the bolster springs to the Vee bracket, 

see Figure 8-2.

Pro Gear and Transmission  • 906 W. Gore St. Orlando, FL 32805 • 1 (877) 776-4600 / (407) 872-1901 • [email protected]

Содержание Hendrickson HN 422FR










































Отзывы:

Нет отзывов