ProGear Hendrickson HN 422FR Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 41

ProGear Hendrickson HN 422FR Скачать руководство пользователя страница 27

HN

®

FR Series

Component Replacement

26

17730-285

FIGURE 8-4

REBOUND STRAP

DISASSEMBLY

SERVICE HINT

Vehicle may need to be in the loaded condition for the rebound strap to be slack enough for
removal.

FIGURE

8-5

1. Chock the front wheels.

2. From the inboard side of the saddle remove the ½" locknuts

and ½" flat washers from the top of the upper anchor plate
assembly of the rebound strap.

3. From the outboard side remove the ½" locknuts and ½"

flat washers from the lower anchor plate assembly of the
rebound strap. This will free the rebound strap and anchor
plate assembly. Slide off, and free both ends of rebound
strap from the anchor plate assembly, see Figure 8-5.

SERVICE HINT

The anchor plate assembly welds of bolt heads

DO NOT

need to be cut or separated to replace

rebound strap.

ASSEMBLY

1. Install the upper anchor plate through the rebound strap

2. Attach the upper anchor plate to the auxiliary spring mounting plate. Tighten the fasteners

to 90-105 foot pounds torque.

3. Install the lower anchor plate through the rebound strap.

4. Attach the lower anchor plate to the equalizing beam. Tighten the fasteners to 90-105

foot pounds torque.

5. Remove the wheel chocks.

Pro Gear and Transmission • 906 W. Gore St. Orlando, FL 32805 • 1 (877) 776-4600 / (407) 872-1901 • [email protected]

«
...
25
26
27
28
29
...
»

Содержание Hendrickson HN 422FR










































Отзывы:

Нет отзывов