background image

Safety instructions

 SAFETY PRECAUTIONS!

•  Do not expose the equipment to hasty tempera-

ture changes in humid conditions as this could 
lead to condensation water in the unit. 

•  Do not connect this equipment to fl ash  equip-

ment from other brands.

•  Do not use fl ash heads without supplied protec-

tive glass covers or protective grids.

•  Glass covers shall be changed if it has become 

visibly damaged to such an extent that their ef-
fectiveness is impaired, for example by cracks or 
deep scratches.

•  Lamps shall be changed if they are damaged or 

thermally deformed.

•  When placing a lamp into the holder ensure not 

to touch the bulb with bare hands.

•  Equipment must only be serviced, modifi ed  or 

repaired by authorized and competent service 
personnel!

 WARNING – Electrical Shock Hazard – High Voltage!

•  Mains powered generator shall always be con-

nected to grounded mains power supply outlet!

•  Only use Profoto extension cables!

•  Do not open or disassemble generator or lamp 

head! Equipment operates with high voltage. 

•  Generator capacitors are electrically charged 

for a considerable time after being turned off.

•  Do not touch modeling lamp or fl ash tube when 

mounting umbrella metal shaft in its refl ector 
hole.

•  Disconnect lamp head cable between generator 

and lamp head when changing modeling lamp or 
fl ash tube!

•  Read and follow all safety instructions below 

carefully to avoid injuries or damages! 

•  Make sure that Profoto Safety Instructions is 

always accompanied the equipment!

•  Profoto products are intended for professional 

use!

•  Generator, lamp heads and accessories are only 

intended for indoor photographic use. 

•  Do not place or use the equipment where it can 

be exposed to moisture, extreme electromagne-
tic fi elds or in areas with fl ammable gases or 
dust!

•  Do not expose the equipment to dripping or 

splashing.

•  Do not place any objects fi lled with liquids on or 

near the equipment.

Содержание Pro-8a 1200 Air






























Отзывы: