9
9.
Make sure that all parts are properly tightened before you use the treadmill.
Note: Extra hardware may
be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt
(see page 17). To protect the floor or carpet, place a mat under the treadmill.
8. Orient the Latch Housing (29) so the large hole is on the
indicated side. Attach the Latch Housing to the left Upright
(69) with two 3/4” Screws (2).
Remove the knob from the pin.
Make sure that the col-
lar and the spring are on the pin as shown.
Insert the
pin into the Latch Housing (29), and tighten the knob
back onto the pin.
Pin
Collar
Spring
Knob
69
29
2
8
Large
Hole
