5
M8 Locknut
(37)–4
M8 Split
Washer (36)–8
M10 Split
Washer (34)–4
M8 x 20mm Patch
Screw (35)–4
M4 x 16mm
Screw (40)–8
M10 x 54mm Button Screw (33)–2
M10 x 78mm Button Screw (67)–2
M8 x 25mm Patch
Screw (50)–2
M6 x 8mm Patch
Screw (56)–1
M4 x 30mm Round
Head Screw (84)–4
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires an adjustable wrench
and a Phillips
screwdriver
.
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing refers to the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly.
Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
